2Pcs 44 Key IR Remote Controller 12V For 3528 5050 RGB LED Strip Light 2-Outputs

Description

2-Port 44 Keys RGB IR Remote Control for 5050 2835 3528 RGB LED Strip Lights Output Voltage DC12V-24V LED RGB IR Remote Control of 2 Pack
Specifications:
Type: 44Key Remote Controller
Connection mode: Common Anode (+)
Output current: <2A (each channel)
Output power: 12V: <72W
Max load current: 2A each color
Output: three CMOS drain-open output
Working Temperature: -20°C-60°C
Mode & Pattern:
44 key IR Remote Controller: Color: 20 Colors
8 Light Pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpychange R / G / B increase and decrease control
44 keys infrared controller which has 6 keys(DIY keys) for momories the colors what you preferred
Control box dimension: 50mm x 33mm x 22mm ± 0.2mm
Remote controller dimension: Size: 124 (L) ×56(W) × 6 (H) ± 0.2mm
Remote controller battery: 1 x CR2025 (
Included
)
Brightness+
Brightness-
Pause/Run
ON/OFF
Static red
Static Green
Static Blue
Static white
Static orange
Static light green
Static Dark blue
Milk white
Static Dark yellow
Static Cyan
Static lyons blue
White pink
Static Yellow
Static Light blue
Static Purple
Green-white
Static light yellow
Static Sky blue
Static Brown
Blue-white
Increase Red
Increase Green
Increase Blue
Speed Up
Decrease Red
Decrease Green
Decrease Blue
Speed Down
DIY Key 1
DIY Key 2
DIY Key 3
Automatice Change
DIY Key 4
DIY Key 5
DIY Key 6
Flash on and off
3color jumpy change
7color jumpy change
3color Fade change
7 color Fade change
Package included:
2 X IR Controller
2 X 44 Key Remote
NOTE!
If the buttons don't control the right colors. First, you can press the remote control switch button , turn off the light strip. Then press the FADE7 button（the last button below the right）, The light strip will flash. Then press the switch button to turn on the light strip, the buttons can control the correct color. If not, repeat the above steps until the button can control the correct color. If you can end the operation.
Remote control doesn’t work. First, pull out the plastil piece before use. Then connect ir controller with led strip, it doesn’t work, disconnect the strip bar, reverse link. If the remote control still does not work, contact us to change a new one please.
On May-28-21 at 05:10:17 PDT, seller added the following information: