Car Paintless Dent Remover Repair Kit Hail Damage Golden Bridge Puller Auto Tool

Description

Golden Metal Bridge Puller
1.Aluminum body
2. Stainless Steel Adjustment knob
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4. One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5. With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
6. On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
About 20 W Mini Glue G
u
n
Material: Plastic & Aluminum
Working power: 20W
Working voltage: 100 to 220V
Working temperature: 356 to 392
Nozzle diameter: 0.070-0.078 inch
Warm-up time: 3-5 minutes
Cable length: 55 inch
Size: 5.1 inch*4.3 inch*1 inch
Color: Blue
Hot Melt Glue Sticks
Features:
√
Softening Point: 178°F. (81°C.)
√
Working Time: 40 seconds
√
Viscosity / Centipoises: 5,500 @ 380°F. (193°C.) 12,000 @ 356°F. (180°C.)
√
Temperature of Glue Gun: High Temperature
√
Shape: Round
Warm Prompt
:
1. Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
2. To avoid get an electric shock during use, do not use it in a humid environment and keep it away from children.
3. The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue, please control release the trigger or cut off the power in advance.
4. Cut off the power when stop using, and never try to disassemble the melt glue gun in any case.
Package list:
1 PC Mini Glue Gun
1 PC Golden Bridge Puller
1 PC Mini Suction Cup
5 PCS Mini Yellow Glue Sticks
5 PCS Mini Black Glue Sticks
1 PC Alcohol Bottle(empty)
1 PC Rubber Shovel
1 PC Cleaning Cloth
How to Remove Dent?
1. Clean the dent with a clean wet cloth;
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into
the glue gun, connect the power source and preheat for 5 minutes;
3. Use a proper drawing gasket. A large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backward to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
About Logistics
:
After receiving the payment, we will send your parcel from California within 2 days (usually within one day). You can usually receive the parcel in 4-7 days. The logistics is very fast, so don't worry.
About us:
We are from California, USA, and we are committed to building a good reputation to ensure that every customer is satisfied with us. Your satisfaction is our driving force. If you have any questions or comments about our products. please feel free to contact us.
We will try our best to satisfy customers. If you are not satisfied for any reason, please do not leave negative/neutral feedback soon.
We strive to ensure that every customer is 100% satisfied and solve any problems for you. ToIf you are not satisfied with this project. Please visit the store, there are more similar products waiting for you.