Paintless Car Body Dent Repair Puller Hammer Tools Hail Damage Remover Kit New

Description

Store category
Sign Up Now !
You may also like
Paintless Car Body Dent Repair Puller Hammer Tools Hail Damage Remover Kit New
Product Description
Step-By-Step Instructions for Repairing Car Paintless Dent:
1. Use a clean cloth to clean the dents
2. Put the special glue stick into the hot melt glue gun, insert the power supply and heat it for 3-5 minutes. When the trigger is pulled lightly, the glue can be discharged, and when the muzzle is about to drip glue, it means that the glue stick is fully heated
3. A variety of pad suction cups of different sizes are available for you to choose. You can compare the size of the depression to choose a suitable suction cup for repair. Large pits choose a large suction cup, the larger the suction cup, the greater the traction
4. Use a glue gun to glue the selected suction cup (the technique is very important and apply evenly on the suction cup like the water of a lotus leaf, and the glue around the suction cup is even and thick. Put a little more glue in the middle to make it slightly protruding)
5. After applying the glue, quickly stick the suction cup to the recessed position for 2-3 seconds. When sticking the suction cup, do not squeeze the glue to the outside. When the glue cools quickly but there is a little residual temperature, the pulling force is After the largest glue is applied, a thick layer of glue is applied to the surface of the suction cup to seal the suction cup to prevent degumming.
6. T pull the head and jam the suction cup. Note: You must keep the hammer and pull outwards vertically, and repeat the operation several times patiently until the depression is restored to level.
7. After repairing, use 95 degrees alcohol, while pouring and scraping the glue will soften and clean it with a spatula; then spray the residual glue on the car body with alcohol and thoroughly clean the residual glue attached to the surface with the spatula (note; use Asphalt cleaner or gasoline degumming effect is best
8.Look to see if there are bumps caused by excessive pulling on the concave surface (note: no bumps indicate that the repair is completed) If there are bumps, you can use a rubber hammer and a repair pen to perform specific leveling.
Package:
1
x
2 in 1 T-shaped tool for dent removal
1x 20w glue gun
1x Empty bottle
1
x
Glue Removal Scrapper
1x C
leaning cloth
10x G
lue sticks
18x G
lue tabs
Note:
🔺 If it is recessed on the hood, the car glue gun cannot be used, because the car glue gun needs to start the car and this will cause the hood to heat up, causing the body surface temperature to rise, which will affect the effect of the glue stick. You can also use the car glue gun when the weather is cooler. Don't use the car glue gun at too high temperature.
🔺 It cannot be repaired under exposure to the sun, because the temperature of the body will affect the use effect of the glue stick.
🔺 Pay attention when applying glue. Align the nozzle of the glue gun with the center of the suction cup and begin to apply glue, and apply the hot melt glue to the entire suction cup in the form of a circle.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We only accept
PAYPAL
as payment
Delivery details
We ship packages by USPS or DHL --2-6 working days .
~~Items are generally shipped out after payment has been verified.
~~Please provide your correct and detailed address and your phone number to ensure the delivery on time. We are not responsible for wrong or undeliverable address. If you need to change your address, please change in paypal befor you pay.Shipping address will refer to the address in Paypal
Terms of sales
=
Replacement/Exchange
We accept exchange/replace item within 30 days when Buyer receive merchandise.
Buyer will pay the return shipping cost regardless any reasons.
All returned items must be received in new,unused condition to received refund.
=
Defective products must be returned within 30 days from the RMA issuing date we will change another one for you or refund your money back.
=
If you buy the wrong products, plese inform us as soon as possible. But if your order has been sent, then all the costs(including original freight, handling charges and the return freight, etc. ) are for your acount.
=
We will be responsible for all kinds of approved return shipping cost for wrong product we sent only.
=
Notice
Instructions not supplied as part of the auction.
We are not responsible for any damage caused by installation of this accessory.
We suggest you are familiar or seek a professional for dismantling your device,or otherwise you may damage or break your device
About us
I am ebay usa seller.will ship it from usa.very quickly shipping time
Contact us
Contact us if you have a complaint, or plan to leave us a negative or neutral feedback. Please contact us and we will be glad to help solve the problem.