Paintless Car Dent Removal Puller Repair Kits Hail Damage Dent Pulling Auto Tool

Description

About Golden Metal Dent Lifter:
1.Aluminum body
2. Stainless Steel Adjustment knob
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4. One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5. With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
6. On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
Note:
1. Use adjustable lifting-mode movable tripod puller and adjust it against the size of the dent.
2.During operation, you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
3. The Dent Lifter squeeze trigger will allow you to control and massage door dings and hail damage until the desired results are achieved.
4.New material and new design, stronger material.
About 20 W Mini
Glue Gun:
Material: Plastic & Aluminum
Working power: 20 W
Working voltage: 100 to 220 V
Working temperature: 356 to 392
Nozzle diameter: 0.070-0.078 inch
Warm-up time: 3-5 minutes
Cable length: 55 inch
Size: 5.1 inch*4.3 inch*1 inch
Color: Blue
About Different Sizes Glue Puller Tabs
Specifications
Material: strengthen plastic
F
eatures:
1. Different tabs for different dent lifter or the Slide Hammer, Works with All Glue Pullers
2. Unique small pits design, fit for Auto Body Dent Repair, this special face can bond the glue well, also clean it easily, the size can match perfectly with dent puller/lifter
3. Durable design allows for perfect placement and superior adherent properties.
Hot Melt Glue Sticks
Features:
√
Softening Point: 178°F. (81°C.)
√
Working Time: 40 seconds
√
Viscosity / Centipoises: 5,500 @ 380°F. (193°C.) 12,000 @ 356°F. (180°C.)
√
Temperature of Glue Gun: High Temperature
√
Shape: Round
Warm Prompt:
1. Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
2. To avoid get an electric shock during use, do not use it in a humid environment and keep it away from children.
3. The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue, please control release the trigger or cut off the power in advance.
4. Cut off the power when stop using, and never try to disassemble the melt glue gun in any case.
Package List:
1 PC  G
olden Metal Dent Lifter
1 PC Mini Glue Gun
42
PCS Glue Tabs
5 PCS Mini Yellow Glue Sticks
5 PCS  Mini Black Glue Sticks
1 PC  Alcohol Bottle
1 PC Rubber Shovel
1 PC Cleaning Cloth
How to use the Dent Puller:
Step 1:
Clean dent surface, If the dent so small and can't see where is it, use a dent board to check where is the dent.
Step 2:
Put the glue sticks to the gun and heat, connect the power source and preheat for 5-10 minutes.
S
tep 3
:
According to the dent size to choose the Glue Puller Tab, then put the heated glue on the puller tab, immediately place the puller tab in the center of the dent and hold on until it sticks.
Step 4:
Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
Step 5:
After the glue cooling, use a dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappears.
Step 6:
After finishing the dent, use the alcohol to clean the glue on the car and the puller tabs.
About Logistics:
After receiving the payment, we will send your parcel from California within 2 days (usually within one day). You can usually receive the parcel in 4-7 days. The logistics is very fast, so don't worry.
About us:
We are from California, USA, and we are committed to building a good reputation to ensure that every customer is satisfied with us. Your satisfaction is our driving force. If you have any questions or comments about our products. please feel free to contact us.
We strive to ensure that every customer is 100% satisfied and solve any problems for you. ToIf you are not satisfied with this project. Please visit the store, there are more similar products waiting for you.
We will try our best to satisfy customers. If you are not satisfied for any reason, please do not contact eBay and leave negative/neutral feedback soon. Please keep in touch with us.